5 Safety Tips to Remember When Working with Cranes
Several companies in the construction and manufacturing industry use cranes to lift and transport heavy objects. While crane operations in Australia are quite professional, accidents can occur and the consequences can be serious.
If you’re an employer, you have to make sure that your team abides by safety regulations when working with cranes. Watch for possible hazards and take important steps to prevent mishaps from occurring.
Here Are 5 Tips for Safe and Successful Operations
1. Watch for Power Lines
When cranes come into contact with a power source, there is a risk of electrocution. This jeopardises the life of the crane operator and others working on the site. To prevent accidental electrocution, you should cordon off hazardous areas. Use appropriate fences or barriers and provide sufficient lighting to make the work area safe.
Crane operators have to keep a safe distance between the equipment and the power line. According to the Occupational Safety and Health Administration, this distance should be no less than a 10-foot radius.
2. Don’t Overload
To prevent large objects from falling and injuring people, never overload the crane. If you’re not sure of the manufacturer’s specified load limit, install a load-checking device to prevent casualties. These devices are not expensive and they help you carry out operations safely and successfully.
3. Ensure the Worksite is Even
Accidents occur when cranes have to travel and transport goods on uneven ground. To prevent risks, make sure the ground is even and appoint a signal worker. Signal workers tell crane operators whether the work area is clear of all risks. They guide them in the right direction and warn them of potential hazards.
4. Maintenance
It’s important to inspect all components of the crane for signs of wear and tear. Look for cracks, loose fasteners, worn out ropes and damaged reeving components. Also inspect the wiring, controls, signal lights and electrical components to make sure the crane is safe enough to perform operations. Just because the crane had no issues yesterday, don’t assume it will work perfectly well today. Look at the equipment daily and listen to it to identify inconsistencies.
5. Avoid Side Pull
Only use the crane to tow loads that are lined up properly. Even if the load is small, avoid side pulling as it will render the crane unstable and cause accidents. If you use the crane for a side pull, you’ll end up damaging the wire rope. Pulling at an angle can also exert lateral and vertical force on the crane; something you must avoid at all costs.
Crane Hire in Sydney
At St. George Cranes, we carry cranes of all sizes. Our machines are safe and reliable and they can help you complete your projects quickly.
Whether you need crane rental in Sutherland, Liverpool or Bankstown,we can arrange for the right crane for your operations.
Need Council or police permits along with your crane hire? We can do that too. Call us on (02) 9546 6680 and enquire about our special offers.
Date posted: 2016-08-12 | posted by: stgeorgec
Tweet